Nextar Digital Photo Frame N1 504 User Manual

 
LCD Travel Alarm Clock  
And Digital Photo Display  
Please read carefully before using this equipment.  
Thank you for purchasing this portable digital photo display. It can be used to store 60 photos. It  
is quick and easy to download pictures into your photo display. You may view your favorite  
pictures stored in this photo display anytime, anywhere.  
Overview of your Digital Photo Display  
 
- 1 -  
LCD Display  
 
- 2 -  
Feature  
1. Photo display: JPG,BMP  
2. Manual or Auto play mode  
3. Time & Date Display  
4. Clock & Hourly Call  
5. Temperature Display  
6. Background light  
Accessory  
1. Photo Viewer *1  
2. 5Pin Mini USB Cable *1  
3. Driver CD *1  
4. User Manual *1  
5. AAA Battery *2  
6. 3V (CR2032) battery *1  
7. Protective Pouch *1  
Key Function  
Previous  
Next  
Increase  
 
- 3 -  
Decrease/Background light  
Power ON/OFF  
Time Setup  
Temp Setup  
Operation:  
1. Install 2 AAA batteries into the unit. The unit will then start automatically and switch to  
slide-show mode. Then you can press  
Press  
or  
to select your favorite picture.  
, to go to the main menu, shown below:  
1) To turn off, press  
or  
to POWER OFF and press  
to confirm.Press and hold  
for 3 seconds to turn on the until.  
Remark: To prevent the waste of battery power, the unit is off automatically at 120 seconds by  
default. If you need to change off time, please go to “Auto On/Off” menu.  
2) To delete a photo, press  
or  
to Delete Image and press  
to confirm.  
3) To select Automatic or Manual slideshow, press  
to confirm:  
or  
to Display Mode and press  
 
- 4 -  
· Press  
or  
to Auto Slide and press  
to set up the slideshow interval (the default  
interval time is 10 seconds, but you can select from 0~120 seconds):  
·Press  
manual slide mode. Then you can press  
4) To set the clock, press or  
or  
to Manual Slide and press  
to confirm. The device will switch into  
to view the pictures.  
or  
to Clock Set and press  
to confirm.  
Press  
or  
to set up the date and time. Press  
to confirm at each step.  
 
- 5 -  
5) Press  
or  
to select Clock Disp, then press  
to confirm. The device will enter  
into clock setup shown below:  
·Press  
or  
to select Disp Clock Normal, then press  
to confirm:  
6) Press  
or  
to Auto ON/OFF, then press  
, it enters into the Auto ON/OFF setup as  
shown below:  
 
- 6 -  
·Press  
below:  
or  
or  
to select Auto ON, and the device will enter into the time setup shown  
·Press  
function.  
to select Auto OFF, then press  
. The device will deactivate the auto off  
to confirm. The device will exit the setup  
7) Press  
or  
to select Exit, then press  
mode. (Note: if you stop pressing buttons for more than 60 seconds while in the setup mode,  
the photo viewer will switch into photo viewing mode automatically.)  
2. When in photo display mode, press  
to enter into delete mode, shown below:  
·Press  
or  
to select Del Current, then press  
again to delete the current photo.  
Select Del All to delete all photos, and select Exit to quit delete mode  
 
- 7 -  
3. Set the Clock  
Set the Time:  
1. Press and hold  
2. Press  
for 3 seconds until the hour digits flash.  
to set the hour.  
3. Press  
4. Press  
5. Press  
6. Press  
7. press  
8. Press  
9. Press  
10. Press  
11. Press  
to confirm. The minute digits flash.  
to set the minute.  
to confirm. The year digits flash.  
to set the year.  
to fonfirm,The month digits flash.  
to set the month.  
to confirm. The date digits flash.  
to set the date.  
to confirm.  
Note: You can Press  
to view the date and month at standby mode.  
4Set the Alarm  
1. Press  
.
2. Press and hold  
3. Press  
for 3 seconds until the alarm icon  
to set the minute.  
appears, and the minute digits flash.  
4. Press  
5. Press  
6. Press  
to confirm. The hour digits flash.  
to set the hour.  
to confirm.  
5Background light  
1. Press  
to show Background light  
2. Background light off within 5 seconds.automatically  
 
- 8 -  
6Select the Temperature Format  
1. Press  
2. Press  
to display the temperature in°C or °F.  
to confirm.  
Specifications  
Picture Formats  
Picture resolution  
LCD  
BMP,JPG,PNG,GIF,TIF  
128*128 dots  
1.5”TFT  
Memory Device  
Memory Capacity  
Slide Mode  
Built-in 8Mbit flash  
60 photo  
Yes  
Automatic Energy Saving  
Transmission Interface  
Power Supply  
120s  
USB Interface Ver.1.1  
2*AAA(3V)Batteries  
USB 5V(optional)  
0-40℃  
Working Temperature  
Operation System  
Win 98 SE/ME/2000/XP/Vista  
Clock and Thermometer  
Time Format  
12/24  
Temperature  
-5-50℃  
±2℃  
Temperature Accuracy  
 
- 9 -  
Test Period (Temperature)  
Back Light  
10 seconds  
5 seconds  
Power Supply  
3V(CR2032)  
Replace Battery for Thermometer  
Your clock and thermometer comes with one CR2032 battery. If it does not work, please take the  
following steps to replace the battery.  
1. Open the battery cover with a coin.  
2. Remove old battery and install the new battery correctly into the compartment.  
3. Replace the battery cover.  
4. Software installation  
Please copy the software to your PC. (Note: this software does not need to install.)  
 
- 10 -  
5. Picture Download  
After you copy the software to your PCconnect the photo viewer to your PC, and the following  
dialogue appears:  
Press  
or  
to select USB Charge and press  
to confirm, or don’t press any buttons  
for 60 seconds. The device will enter into USB charge mode. During this time, you cannot  
download photos into the photo viewer, but you can operate the unit.  
Press  
or  
to select USB update and press  
to confirm. The computer will search  
the hardware automatically, then run the software PhotoViewer.exe. (Note: If you have  
selected USB charge, then please disconnect the USB cable and reconnect it.) The following  
dialogue will appear:  
 
- 11 -  
Select photos from your PC and click  
to add the selected photo into the right panel:  
 
- 12 -  
 
- 13 -  
You can edit the selected photo by clicking  
photo.  
or  
to rotate, and  
or  
to crop the  
Click  
to delete the selected photos from the right panel. Then press  
to download the  
selected photos into your photo viewer:  
 
- 14 -  
 
- 15 -  
When the download is finished the following message will appear: “Photo Viewer data  
synchronize complete”. Click OK to finish.  
(Please connect the PC when you download pictures. If you have open windows, close them  
before connecting your PC.)  
 
- 16 -  

MTX Audio Portable Speaker T5512 44 User Manual
Multiquip Welding System GLW 180H User Manual
NAD Stereo Receiver T762 User Manual
NewAir Humidifier AU 200E User Manual
Nortel Networks Digital Camera P7000 User Manual
Palsonic Air Conditioner A22R220 User Manual
Panasonic CRT Television BT LH1700WMC User Manual
Panasonic Scanner KV SV50 User Manual
Panasonic Vacuum Cleaner MC CG937 User Manual
Patton electronic Network Card 1002 User Manual