Nextar Digital Photo Frame N3 502 User Manual

3.5 inch  
Digital Photo Frame  
USER’S MANUAL  
Item#: N3-502  
 
1. Read all safety and operating instructions before  
operating this product.  
2. Save these instructions for future reference.  
3. Adhere to all warnings in this operating manual.  
4. This product should be connected to a power supply  
only of the type described in the operating  
instructions or as marked on the unit.  
5. Disconnect the power source plug before cleaning.  
6. Dusting the unit with a soft cloth is recommended.  
Do not clean the inside of the unit.  
7. The power cord should be unplugged from the outlet  
when the unit is not in use for a long period of time  
or while cleaning.  
8. Do not place the unit near a heater.  
9. Do not get water or excessive moisture into the unit.  
10. Dropping the unit, or dropping objects on the unit,  
will result in breaking or scratching the glass LCD.  
2
 
Content  
Warning.......................................................................1  
Safety precaution.......................................................1  
Introduction ................................................................4  
1Features..........................................................4  
2Packaging Check List .....................................4  
3Specifications..................................................5  
Product Diagram & Function ....................................6  
Frame  
Screen  
Technical Notes........................................................11  
Question/Troubleshooting Guide...........................11  
3
 
Introduction  
1Features  
3.5inch TFT (Digital - 4:3)  
Automatic slide show and operate by user  
Slide Show Intervals preset and allow changing by user  
Supports SD / MS / MMC memory slot  
Supports viewing one selectable photo  
Supports JPEG picture format  
Magnetic changeable Frame ,Unique cradle design and  
easy control button  
2Packaging Check List  
Digital Picture Frame  
User Manual  
Stand  
AC Adaptor  
Quick Start Guide  
4
 
3Specifications  
Screen Dimension: 3.5” Screen  
Resolution: 320 x 240  
Brightness: 240cd/m  
Contrast: 100:1  
Photo File Formats: JPEG  
Memory Card Formats: SD / MS / MMC Card  
Voltage: DC 5V/1.0A  
Current: 1.0A  
View Angle: Left/Right 45 degrees, Up/Down 30 degrees.  
5
 
Product Diagram  
Frame  
Magnetic changeable Frames  
Screen  
6
 
1. Enter Button  
1) Thumbnail file list: To display selected picture  
2) Single show mode: Click this button to zoom in  
and press it for one second, it will rotate the picture by  
90 degrees.  
3) Slide show Mode: Click to stop slide show  
7
 
2. Down button  
1) Thumbnail file list: Move down to highlight different  
pictures  
2) Zoom: It will move the picture downwards  
3) Single show and slide show mode: Click the button  
to return to the Main Menu  
3. Up button  
1) Thumbnail file list: Move up to highlight different  
pictures  
2) Zoom: It will move the picture upwards  
3) Single show mode: Click the button to enter into  
slide show mode and click it again to choose the  
intervals.  
8
 
4. Right button  
1) Thumbnail file list: Move right to highlight different  
pictures  
2) Zoom: It will move the picture rightwards  
3) Single show mode: Click the button to display the  
next picture  
5. Left button  
1) Thumbnail file list: Move left to highlight different  
pictures  
2) Zoom: It will move the picture leftwards  
3Single show mode: Click the button to display the  
preview picture  
9
 
6. Power Port  
Plug in the adaptor and it will turn on automatically  
7. SD/MS/MMC Card Slot  
Insert your media card and it will enter into the  
thumbnail interface  
8. Stand  
Attach the stand to the back of the frame.  
10  
 
Technical Notes  
1. Your Digital Photo Frame is a sophisticated  
electronic device. Do not drop or subject the unit  
to jarring or strong vibrations.  
2. Avoid placing the Digital Photo Frame in areas of  
high humidity or where it might be subjected to  
splashing.  
3. The panel is made of plastic and can be easily  
damaged. Avoid contact with sharp objects.  
4. Use only a soft dry cloth to clean the screen.  
Question/Troubleshooting Guide  
This chapter presents some troubleshooting problems  
you may encounter while using the device. Even if the  
following guide fails to solve your problem, please do  
not disassemble the device, but leave the problems to  
professional staff.  
11  
 
1.Question: What kind of photos does this device’s  
supports?  
Answer: The Frame will display digital photos that are  
stored in the JPEG format which is the standard  
format for nearly all digital cameras. Some cameras  
allow images to be stored as TIFF or with the Frame;  
RAW files as well as JPEG. Only the JPEG format is  
compatible  
2.Question: What should I do if the system does not  
respond when the power is turned on?  
Answer: Make sure the unit is properly connected to  
a power source. Then turn it off, reconnect the power  
and turn it on again.  
3.Question: Why is the memory card not recognized?  
Answer: The memory card might be inserted  
rearwards or is not pushed in far enough. After  
inserting the memory card in the right direction; if the  
card still cannot be read, please turn off the unit and  
then power it again.  
12  
 
This device complies with part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference  
received, including interference that may cause  
undesired operation.  
Note: This equipment has been tested and found to  
comply with limits for Class B digital device, pursuant  
to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against  
harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio or television reception, which can  
be determined by turning the equipment off and on,  
the user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
1. Reorient or relocate the receiving antenna.  
2. Increase the separation between the equipment  
and the receiver. Connect the equipment into an  
outlet on a circuit different from that to which the  
receiver is connected.  
3. Consult the dealer or an experience radio/TV  
technician for help.  
13  
 
Nextar™ a trademark of Nextar (Hong Kong) Limited  
Nextar may find it necessary to modify, amend or  
otherwise change or update this manual.  
We may reserve the right to do this at any time,  
without any prior notice.  
All specifications and features are subject to change  
without notice.  
Or write us at:  
Nextar Inc.  
1661 Fairplex Dr.  
La Verne, CA91750  
USA  
14  
 

Milwaukee Cordless Saw 0729 20 User Manual
MTD Snow Blower 737 0168 User Manual
Multiquip Portable Generator DCA25SSIU User Manual
Nady Systems Microphone DKW3 HT User Manual
Nady Systems Stereo Amplifier SPA 1400 User Manual
Onkyo Stereo Receiver TX NR579 User Manual
Optoma Technology Projector PK120 User Manual
Oregon Scientific Fitness Electronics PE823 User Manual
Panasonic Air Conditioner CW XC120AU User Manual
Panasonic Answering Machine KX TEM824 User Manual